Table Des Matières - OTT MF pro Manuel D'utilisation De Base

Table of contents
Specifications on page 3
General information on page 5
Installation on page 10
User interface and navigation
Expanded manual version
For additional information, refer to the expanded version of this manual, which is available on the
manufacturer's website.
Specifications
Specifications are subject to change without notice.
Sensor specifications
Specification
Velocity measurement
Method
Range
Minimum water depth
Accuracy
Resolution
Zero stability
Material
Enclosure rating
Dimensions (L x W x H) 11.9 x 4.3 x 6.3 cm (4.7 x 1.7 x 2.5 in.)
Cable material
Cable lengths
Depth measurement
Method
Accuracy (static)
Range
Resolution
on page 14
Details
Electromagnetic
0 to 6.09 m/s (0 to 20 ft/s)
3.18 cm (1.25 in.)
±2% of reading ±0.015 m/s (±0.05 ft/s) 0 to 3.04 m/s (0 to 10 ft/s); ± 4% of reading from
3.04 to 4.87 m/s (10 to 16 ft/s)
0 ≤ value < 10: 3 decimal places; 10 ≤ value < 100: 2 decimal places; 100 ≤ value <
1000: 1 decimal place; value ≥ 1000: 0 decimal places
±0.015 m/s (±0.05 ft/s)
ABS, glass filled
IP68
Polyurethane jacketed
2, 6.1, 12.2 and 30.5 m (6.5, 20, 40 and 100 ft)
Diaphragm type: absolute pressure with single point calibration
The larger of ± 2% of reading or ± 0.015 m (± 0.504 inches). Steady state temperature
and static non-flowing water.
3.05 m (0-10 ft)
0 ≤ value < 10: 3 decimal places; 10 ≤ value < 100: 2 decimal places; 100 ≤ value <
1000: 1 decimal place; value ≥ 1000: 0 decimal places
Startup and self-test on page 19
Maintenance on page 20
Troubleshooting on page 21
English 3