Publicité
How to Use
EN
Starting Dust Collection
1. Place the dust-removal hub near a
power outlet and put the plug into it.
2. Place the vacuum on the dust-removal
hub (the vent of the dust cup should be
aligned with that of the dust-removal
hub) until you hear a click.
3. Press the dust collection button.
Fig. D-5
Note:
• The dust collection process cannot be
stopped by pressing the dust collection
button.
• If there is a lot of garbage in the dust
cup, please perform the dust collection
process several times to achieve better
cleaning results.
• If the dust collection bag reaches
capacity or the air duct is blocked during
the dust collection process, the dust-
removal hub will stop working after the
process is completed and cannot collect
dust again.
Using Different Accessories
Multi-Surface Brush
Note:
• The multi-surface brush can be attached
directly to the vacuum.
• When the appliance starts, the
lights in front of the brush roller
will automatically turn on, which is
convenient for use.
-
When using on baby play mats, carpets
or for vacuuming coffee beans, pop corn
and other pellets, turn on the switch on
the brush.
-
When vacuuming on tiles, wooden
floors or other hard surfaces, turn off the
switch.
Fig. D-6
6
Soft Roller Brush
Suitable for cleaning hard floors such as
marble and tile.
Fig. D-7
Motorized Mini-Brush
For vacuuming dirt, pet hair, and other
stubborn debris from sofas, bedding, and
other fabric surfaces.
Note: It is not recommended to vacuum
on fragile surfaces, such as silk.
Fig. D-8
Soft Dusting Brush
Suitable for vacuuming on LCDs, keyboards,
lampshades, curtains, shutters and other
surfaces of fragile objects.
Fig. D-9
Combination Tool
Suitable for vacuuming cracks, corners of
doors and windows, stairs, and other hard-
to-reach places.
Fig. D-10
Accessory Mount
The soft dusting brush, combination tool
and motorized mini-brush can be placed
on the accessory mount when not in use.
Fig. D-11
Note:
• If any rotating part becomes stuck, the
vacuum may shut off automatically.
Remove any trapped foreign objects,
then resume use.
• When the battery becomes overheated,
the vacuum will automatically shut
off. Wait until the battery temperature
returns to normal, then resume use.
Care & Maintenance
Tips:
• Always use genuine parts to keep your
warranty from being void.
• If the filter or nozzle becomes clogged,
the vacuum will stop working shortly
after being turned on. Clear the tube to
restore functionality.
Publicité
