Publicité
• Vacuuming at Turbo mode for a
EN
prolonged period will cause the battery
to heat up, which increases charging
time. Allow the vacuum to cool down for
30 minutes before charging it.
• When the vacuum is not in use, it can be
placed on the dust-removal hub.
• The outlet of the power cord can be
adjusted according to users' needs.
Fig. C-1
Battery Status Display
Display Screen
The number on the display screen
represents the current battery level in a
percentage during charging. When the
number becomes 100, the battery is fully
charged.
Fig. C-2
Battery Status Indicator
Charging
Fully charged
Discharging
Battery Level ≥ 10%
Battery Level ＜ 10%
Solid white
Fig. C-3
How to Use
Display Screen
1. Trigger Switch Lock
Press briefly to enter/ exit the lock state.
2. Suction Level
The color of fan-shaped icon changes
with different modes.
3. Lock Status
4. Battery Level Percentage
When the display shows "LO", it indicates
that the battery level is lower than 10%.
5. Suction Level Switch
Press briefly to switch between eco, med
and turbo mode.
Note: The Med mode is used by default
every time the vacuum is turned on.
4
Charging
Standby Mode
Blinking white
Off
Charging/Battery Level Indicator
Low Battery Level
Blinking red: Battery level ≤ 10%
Out of Battery
Blinking red: Battery level ＝ 0%
Charging
Breathing red: Battery level ≤ 10%
Breathing green: Battery level ＞ 10%
Fig. D-1
Suction Level
Med
Eco
Fig. D-2
Turbo
Publicité
