Publicité
parts, breakage of parts and any other condi‐
tion that may affect the power tool's opera‐
tion. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
f)
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier
to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situa‐
tion.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
24.6
Battery tool use and care
a) Recharge only with the charger specified by
the manufacturer. A charger that is suitable
for one type of battery pack may create a risk
of fire when used with another battery pack.
b) Use power tools only with specifically desig‐
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a connec‐
tion from one terminal to another. Shorting
the battery terminals together may cause
burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery
may cause irritation or burns.
e) Do not use a battery pack or tool that is dam‐
aged or modified. Damaged or modified bat‐
teries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or
f)
excessive temperature. Exposure to fire or
temperature above 130 °C may cause explo‐
sion.
g) Follow all charging instructions and do not
charge the battery pack or tool outside the
0458-724-9602-A
temperature range specified in the instruc‐
tions. Charging improperly or at tempera‐
tures outside the specified range may dam‐
age the battery and increase the risk of fire.
24.7
Service
a) Have your power tool serviced by a qualified
repair person using only identical replace‐
ment parts. This will ensure that the safety of
the power tool is maintained.
b) Never service damaged battery packs. Serv‐
ice of battery packs should only be per‐
formed by the manufacturer or authorized
service providers.
Table des matières
1
Préface......................................................31
2
Informations concernant la présente Notice
d'emploi.....................................................32
3
Vue d'ensemble........................................ 32
4
Prescriptions de sécurité...........................33
5
Préparatifs avant l'utilisation du souffleur..37
6
Assemblage du souffleur.......................... 37
7
Introduction et extraction de la batterie.....38
8
Ajustage du souffleur selon l'utilisateur.....38
9
Mise en marche et arrêt du souffleur........ 39
10
Contrôle du souffleur.................................40
11
Travail avec le souffleur............................ 40
12
Après le travail.......................................... 41
13
Transport...................................................41
14
Rangement............................................... 42
15
Nettoyage..................................................42
16
Maintenance et réparation........................ 42
17
Dépannage............................................... 42
18
Caractéristiques techniques......................43
19
Pièces de rechange et accessoires.......... 44
20
Mise au rebut............................................ 44
21
Déclaration de conformité UE................... 44
22
Déclaration de conformité UKCA.............. 45
23
Adresses................................................... 45
24
Indications générales de sécurité pour outils
électroportatifs.......................................... 46
1
Préface
Chère cliente, cher client,
Nous vous remercions d'avoir choisi un produit
STIHL. Dans le développement et la fabrication
de nos produits, nous mettons tout en œuvre
pour garantir une excellente qualité répondant
aux besoins de nos clients. Nos produits se dis‐
tinguent par une grande fiabilité, même en cas
de sollicitations extrêmes.
français
31
Publicité
