Publicité
7 Removing and Fitting the Battery
11
12
► Press socket (11) into the wiring harness
retainer (12).
The socket engages with an audible click.
6.2
Attaching and Removing the
Nozzle
► Shut off the engine.
► Line up the pin (3) and hole (4).
► Push nozzle (1) onto the blower tube (2).
► Turn the nozzle (1) until it engages.
The nozzle does not need to be removed again.
7
Removing and Fitting the
Battery
7.1
Inserting the Battery
► Place the blower on a level surface.
1
► Place the battery (1) on the back plate (2) so
that the guides on the back plate (2) fit into the
recesses on the battery (1).
0458-724-9602-A
2
3
4
2
4
1
► Open and hold the lever (5).
► Press the battery (1) against the back plate (2)
until the connector (3) rests against the
socket (4).
1
► Press the lever (5) down until it engages with
an audible click.
7.2
Removing the Battery
► Place blower on a level surface.
► Open the lever.
► Remove the battery.
8
Adjusting Blower for User
8.1
Fitting and Removing Harness
8.1.1
Fitting and Adjusting the Carrying
Strap
► Put the blower on your back.
► Close buckle (1) on the waist belt.
English
3
5
2
5
1
23
Publicité
