Eaton Tripp Lite Serie Mode D'emploi page 18

Command Line Interface
Table 3. CLI Commands (Continued)
User Command Name
about
get_device_connection
dump_json_formatted_
logs
clear_logs
show_logs
reboot_card
factory_reset_card
12 Eaton Tripp Lite Series Cloud Connected UPS System User Guide 934927—Rev B
Description Sample Input/Output
Print out versions and Network Card Serial
serial numbers Number
Network Card Firmware
Part Number: FW-3114
Network Card Firmware
Version: 0.9.0
Device Serial Number:
3302AVLBC884A00019
Device Firmware Part
Number: FW-2B13
Device Firmware
Version: 02
Device Profile ID:
2c389aea-edfe-ed11-
907c-0022481cd9be
Device Profile Version:
16
NFC Version: 8003.6
CLI version: 8002.22
Get the deviceID and Device GUID/UUID -
ConnectionString <device GUID/UUID>
Device Connection String
- <Connection String>
DEBUG: Dump JSON
formatted logs
Clear all logs from NV
Show all logs Event Log is currently
Empty!
Reboot the card N/A
Factory reset the card N/A
Note
Network Card Serial number will be shown
once it's set.
This will print out stars(*) for connection string
only after commissioning
Output size might be bigger than 200
characters
Output size might be bigger than 200
characters
Keep the last changes(if any) to the network
settings(IPV4) and password intact. This
command reboots the card to complete the
network settings configuration.
Returns the network settings (IPV4) and
password back to default values.