Eaton Tripp Lite Serie Mode D'emploi page 17

Table 3. CLI Commands (Continued)
User Command Name
get_proxy_status
Get the status of proxy
set_proxy_disable Disable proxy
set_proxy_enable Enable proxy
set_proxy_username
Set the proxy username
set_proxy_password Set the proxy password
get_proxy_username
Get the proxy username
get_proxy_password Get the proxy password
get_sntp_server1 Get the SNTP Server 1 IP
address or Host Name
get_sntp_server2 Get the SNTP Server 2 IP
address or Host Name
get_sntp_server3 Get the SNTP Server 3 IP
address or Host Name
get_sntp_status
Get SNTP Server status
get_sntp_service Get SNTP Server
connection
set_sntp_disable Set SNTP Server disable
set_sntp_enable
Set SNTP Server enable
get_primary_dns Get the primary dns
get_secondary_dns Get the secondary dns
get_time
Get the current time of
system
get_iot_connection_ Get IOT connection status
status
get_iot_connection Get IOT DPS connection
get_iot_connection_ Get IOT Connection
reason
status and reason.
get_iot_dps_endpoint Get IOT DPS endpoint.
Description Sample Input/Output
PROXY is not enabled.
PROXY is disabled.
PROXY is enabled.
<username>
<password>
PROXY username is
<username>
PROXY password is
<password>
SNTP server 1 IP
Address/Domain name:
129.6.15.28
SNTP server 2 IP
Address/Domain name:
132.163.96.1
SNTP server 3 IP
Address/Domain name:
132.163.97.1
SNTP service enabled.
SNTP service connected
to server 1.
SNTP server disabled
successfully.
SNTP server enabled
successfully.
Primary DNS: 8.8.8.8
Secondary DNS:
192.168.0.1
Epoch Time from RTC
(seconds) - 1692282558
IOT Connection is
enabled.
IOT Connected.
IoT initial state.
IOT DPS endpoint -
global.azure-devices-
provisioning.net
Eaton Tripp Lite Series Cloud Connected UPS System User Guide 934927—Rev B
Command Line Interface
Note
Sets the username for proxy. The length of
username must not exceed 21 characters.
Sets the username for proxy. The length of
username must not exceed 21 characters.
This will print out stars(*) only after
commissioning
Time since epoch
11