Publicité
14.5
Settings
Danger due to electrical voltage!
Handling the machine while it is connected to the power supply can lead to serious
injuries or death.
Always disconnect the machine from the power supply before carrying out
adjustment or maintenance work and secure it against reconnection.
Saw blade
The material of the workpiece and the saw blade teeth are important criteria for a precise cutting
result. Both the number of teeth and their shape, arrangement and position are associated with a
specific function.
To improve the quality of the cut, always make sure that several teeth (at least 2-3) cut through the
workpiece at the same time. If only one tooth is working, the result is a poor machining surface
and the risk of kickback, vibrations and sound pollution increase.
Only work with a well ground saw blade!
Riving knife
Saw blade guard
Saw blade height adjustment
HOLZMANN Maschinen GmbH
W A R N I N G
suitable saw blade
Adjust the distance and parallelism between the riving
knife and the saw blade with the setting screws
- To do this, loosen the nut (1) slightly
- Make adjustments with setting screws (2)
- Retighten the nut
NOTE:
of the riving knife must be within 0-2 mm.
NOTE:
riving knife must be always within 3-8 mm.
Adjust the saw blade guard (1) so that the saw blade is
protected. The distance between the saw blade guard
and the workpiece should be max. 5 mm.
Turn the hand wheel (1) clockwise to lift the saw blade
upwards. Turn the hand wheel counterclockwise to
lower the saw blade. The height of the saw blade must
be adjusted so that the teeth hit the top of the work-
piece.
www.holzmann-maschinen.at
The distance between the saw blade and the top
The distance between the saw blade and the
ASSEMBLY
unsuitable saw blade
FKS305V32TOP_400V
45
Publicité
