Publicité
Please note that locally applicable laws and regulations determine the minimum age of the
operator and may restrict the use of this machine!
Work on electrical components or equipment may only be carried out by a qualified
electrician or under the guidance and supervision of a qualified electrician.
Put on your personal protective equipment before working on the machine.
12.3
Safety devices
The machine is equipped with the following safety devices:
12.4
General safety instructions
To avoid malfunctions, damage and health impairments when working with the machine, the
following points must be observed in addition to the general rules for safe working:
Check the machine for completeness and function before starting. Only use the machine if
•
the separating and other non-separating protective devices required for machining have
are fitted.
Make sure that the guards are in good working order and properly maintained.
•
Select a level, vibration-free surface as the installation area.
•
•
Ensure sufficient space around the machine.
Ensure that the machine is on a firm footing.
•
Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects.
•
•
Ensure a clean working environment.
Keep the area around the machine free of obstacles (e.g. dust, chips, cut-off workpiece
•
parts, etc.).
•
Only use tools that are in perfect condition and free of cracks and other defects (e.g.
deformations).
•
Remove tool keys and other setting tools before switching on the machine.
Check the machine's connections for strength before each use.
•
HOLZMANN Maschinen GmbH
A self-locking Emergency Stop on the control panel and on the
machine backside to stop dangerous movements at any time.
Safety guard (adjustable): Saw blade guard (1), to cover the saw
unit.
Riving knife (2), to reduce the risk of wedging the workpiece.
The setting is in horizontal and vertical direction opposite to the
saw blade.
Push stick (4): For cutting operations where less than 120mm is
cut, i.e. less than 120mm distance to the right of the saw blade to
the rip fence. Do not feed the wood by hand, but with the push
stick.
Safety device for longitudinal cuts.
Press the workpiece against the edging shoe (5). This prevents
the workpiece from jumping up.
Interlocking movable guard:
Safety cover of the saw blade (equipped with a safety switch)
This safety switch interrupts the power supply immediately
when the cover is opened.
Interlocking movable guard:
Maintenance door (equipped with a safety switch) This safety
switch interrupts the power supply immediately when the cover
is opened.
www.holzmann-maschinen.at
SAFETY
37
FKS305V32TOP_400V
Publicité
