Télécharger Imprimer la page

SilverCrest HG09439B Instructions D'utilisation Et Consignes De Sécurité page 11

Publicité

Close the cover of the battery compartment
and tighten the screw
Operation
Set the product on a solid, level and flat surface
to weigh.
Weighing
Note: A slight touch of the button TARE
button UNIT
is sufficient to operate the product. If
4
there is too much pressure, the product may tilt.
Note: If the weighing bowl
scale when it was switched on, only the weight of the
food is displayed.
However, if you place the weighing bowl
product after you have switched it on, the product will
indicate the weight of weighing bowl
ways press the button TARE
numerical display
to "0".
8
The "Tare" symbol T
11
To activate the product, you may directly put a load
(e. g. provided weighing bowl
stuff) onto the weighing surface
weighing surface
with a certain force is also a possi-
5
ble way to activate the product. Press the button TARE
to reset the numerical display
Place the item you wish to weigh onto the weighing
surface
of the product. The numerical display
5
will show the weight of the item you are weighing.
Incremental weighing
If any food is already on the weighing bowl
with the weight of the food and the bowl
the numerical display
.
7
and the
3
was already on the
1
on the
1
. You can al-
1
at any time to reset the
3
will appear.
and minimum 250 g
1
. Pressing onto the
5
to "0".
8
1
.
8
Touching the button TARE
6
will change the numerical display
reading to "0". The "Tare" symbol T
Now add another item to weigh in the weighing
bowl
. The numerical display
1
weight of the newly added item.
If you remove the item added in the weighing bowl
the numerical display
If you remove all items from the product, the LC dis-
play
will show a negative value indicated by
2
the minus symbol
Then briefly touch the button TARE
"Tare" symbol T
Important! Be sure never to add more than
5 kg to the weighing bowl
product can damage it.
Changing the measuring unit
The product will display the weight in the official Euro-
pean measuring unit "g" (grams), as well as the tradi-
tional unit of weight "oz" (ounce, 1 oz ≈ 28.35 g) or
"lb'oz" (pound: ounce, 1lb = 16 oz ≈ 453.59 g).
When measuring the volume of water, the product
calculates it by the weight using the official European
unit of volume "ml" (millilitres) or the traditional unit of
measure "fl'oz" (fluid ounces, 1fl'oz ≈ 28.41 ml).
To switch the unit of measure, briefly touch the UNIT
3
button
. After each time it is touched, the unit
4
display
will switch to the next unit listed:
9
8
g → oz → lb'oz → ml → fl'oz
Switching off
1
on
Holding the button TARE
will switch off the product. If no movement is detected
with the product on
3
from the
8
will appear.
11
will show the
8
will again read "0".
8
.
10
, and the
3
will disappear.
11
. Overloading the
1
for approx. 3 seconds
3
GB/IE/NI
,
1
11

Publicité

loading

Ce manuel est également adapté pour:

460086 2401