Publicité
2 PACKING BOX
2.1 Overview
This chapter mainly introduces the subsequent
operations after the outdoor unit has been delivered to
site and unpacked.
This specifically includes the following information:
Unbox and handling the outdoor unit.
Take out the accessories of the outdoor unit.
Dismantle the transport rack.
Remember the following:
At the time of delivery, check the unit for any damage.
Report any damage immediately to the carrier's claim
dealer.
As far as possible, transport the packaged unit to its
final installation site to prevent damage during the
handling process.
Take note of the following items when transporting
the unit:
Fragile. Handle with care.
Keep the unit with its front facing upwards so
as not to damage the compressor.
Select the unit transportation path in advance.
2.2 Transport
Lifting method
NOTE
Do not remove any packaging during lifting.
Where the unit is not packed or the package
is damaged, use a gasket or package to
protect the unit.
Use a leather belt that can adequately
support the weight of the unit, and has a
width ≥20 mm.
Images are for reference only. Please refer
to the actual product.
The belt must have enough strength to bear
the weight of the unit; keep the machine
balanced and ensure the unit is lifted safely
and stably.
Packaged
Please lift in packaged or protected condition,and do
not remove any packaging before lifting.
Unpacked
It should be protected by sub-plate showing as Fig.2.2,
when the package is damaged.
Center of gravity position is shown in the following
figure 2.3:
Table 2.1
Model
20-33.5kW
Forklift method
To move the unit with a forklift, insert the forks into the
opening at the bottom of the unit, as shown in Figure
2.4.
Fig.2.1
10
Sub-plate
Sub-plate
A
B
770
775
B
A
Fig.2.2
Unit: mm
C
195
C
Fig.2.3
Fig.2.4
V.1
Publicité
