Grizzly ERM 1844 G Traduction De La Notice D'utilisation Originale page 27

All manuals and user guides at all-guides.com
Warning:
The vibration emission value may
differ from the specified value du-
ring actual use of the power tool,
depending on the way in which the
power tool is used. There is a need
to determine safety measures to
protect the operator, based on an
assessment of the exposure duri-
ng actual operating conditions (all
parts of the operating cycle must
be taken into account here, for ex-
ample times when the power tool
is switched off and times when it
is switched on but running with no
load).
This device is designed for operation on
a power supply network with a system
impedance Zmax at the transfer point
(domestic connection) of a maximum of
0.277 Ohms. The user must ensure that
the device is operated only on a power
supply network that fulfils this require-
ment. If necessary, the local power supply
company can be asked for the system
impedance.
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
Guarantee
• This appliance has a 24-month guar-
antee.
• This equipment is not suitable for com-
mercial use. Commercial use will invali-
date the guarantee.
• Damages, which can be attributed
to natural wear, overloading or inap-
propriate use, are excluded from the
guarantee. Certain component parts
are subject to a normal wear and are
excluded from the guarantee. In par-
ticular, these include:
• Furthermore, the prerequisite for guar-
antee services is that the references
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
• Damage, which has been caused
from material or manufacturing faults,
will be made good free of charge, by
replacement delivery or repair.
This requires that the appliance is
returned to the merchant undisman-
tled and with proof of purchase and
guarantee.
Repair Service
• Repairs, which are not covered by
the guarantee, can be carried out for
charge by our service center. Our
service center will be glad to provide
you with a cost estimate.
We can only process devices which
have been packaged sufficiently and
which have been dispatched with cor-
rect stamping.
• Note: In case of complaint or service,
please deliver your device cleaned,
and with an indication of the defect, to
our service address.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
• Defective units returned to us will be
disposed of for free.
GB
blade.
27