Grizzly ERM 1844 G Traduction De La Notice D'utilisation Originale page 26

GB
Changing the Blade
If the blade is blunt, it can be sharpened
by a specialist workshop. If the blade
is damaged or showing signs of imbal-
ance, it must be replaced (see chapter on
"Spare Parts").
1. Turn the equipment over.
2. Use sturdy gloves and hold
the blade firmly (25). Turn the
blade screw (26) anticlockwise
off of the motor spindle using a
screwdriver.
3. Install the new blade in the
reverse order. Ensure that the
blade is positioned correctly and
the screw tightened firmly.
Storage
So the equipment takes up less
space, unlock the two tensio-
ning levers and fold down the
bow handle. Make sure the ca-
bles are not caught.
• Keep the equipment dry and out of
reach of children.
• Allow the motor to cool before storing
the equipment in a confined space.
• Do not cover the equipment with nylon
bags as moisture could build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
26
All manuals and user guides at all-guides.com
Waste disposal and envi-
ronmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center.
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Machines do not belong with do-
mestic waste.
• The plastic and metal parts employed
can be separated out and thus recy-
cled use can be implemented. Ask our
Service-Center for details.
• Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.
• Defective units returned to us will be
disposed of for free.
Technical Specifications
Electric Lawnmower
Motor input power ......................... 1800 W
Mains voltage .....................230 V~, 50 Hz
Protection class ..................................II
Protection type................................... IP24
Idling speed ..............................3250 min
Cutting circle ....................................44 cm
Cut height ................................. 20-70 mm
Weight ...........................................16,2 kg
Lawn bag volume ................................52 l
Sound pressure specification
(L ) ........................86,9 dB(A), K
pA
Noise level specification
guaranteed .............................. 96 dB(A)
measured ....... 93,9 dB(A), K
Vibration (a ) ........... 2,07 m/s
n
...........ERM 1844 G
-1
=2,26 dB
pA
(L )
wA
=2,26 dB
wA
, K=1,5 m/s
2 2