Instruction manual
1. Rotate the small knob to release the water tank.
2. Pull out the water tank.
3. Add water into the tank to at least the minimum level but don't
exceed the maximum level indicator.
4. Pour water into the ice box and put in the freezer until it is
completely frozen.
5. Put the frozen ice boxes into the water tank.
•
The frozen ice boxes can be put in the water tank to increase the
cooling effect.
Do not use the cooling / evaporator function if the water tank is
empty or if the water level is below the minimum mark. If the water
reservoir is less than MIN filled and there is no water in the pipe, it
can severely damage the pump.
USE
•
Press the on/off button to turn the fan on or off.
•
Press the speed button to select the desired airflow speed.
There are three levels to choose from (high, medium and low
speed).
•
Use the swing button to turn on the oscillation mode. The
airflow will now move from side to side. Press the button again to
turn it off.
•
When the unit is in on, press the timer button repeatedly to
have the fan automatically stop after 1 to 7 hours.
•
Press the cool button to turn on the cooling function. The
unit will act as a evaporator now. If combined with the ice boxes,
this unit can lower its surrounding temperature even more.
•
Use the mode button to select a type of airflow. You can
choose between normal airflow, a natural mode and a sleep
mode. The natural mode will try to simulate natural wind, while
the sleep mode provides a more constant airflow. Experiment with
these functions to see what you prefer.
•
If you want to use the ice boxes, remember to put it in the freezer
beforehand. Use them when they are completely frozen.