Publicité
Cleaning and maintenance
• Always disconnect the power cord from the
socket before any cleaning.
• Clean the outside with a damp cloth. Never
use harsh and abrasive cleaners, steel wool
or a scouring pad as this will damage the
device. Do not immerse in water or other
liquid.
• Removable air filter and evaporation pad.
Remove them from the back of the unit, then
wash them in warm water with a mild
detergent and a soft brush. Take care not to
pierce the pad and filter.
• Please ensure that the unit and all of its
parts are cleaned regularly to reduce the risk
of limescale and bacteria forming. The
evaporation pad must be installed flatly, in
order to avoid leaking.
• If the fan will not be used for a long period of
time, drain the condensate water and store it
in a dry place.
• This electrical appliance was manufactured
in accordance with the relevant safety
requirements. Repairs should only be
carried out by qualified persons using
original spare parts, otherwise this may
result in considerable danger to the user.
PARTS DESCRIPTION
1. Control panel
2. Air outlet
3. Water level indicator
4. Caster wheel
5. Remote control
6. Ice boxes
Remote control
•
The remote control use one button cells battery, model No.
CR2025 (3V). We recommend the use of Lithium type battery for
longer use.
•
Ensure the battery is inserted in the correct direction.
•
Press the corresponding buttons as explained in the use part to
operate the cooler.
BEFORE THE FIRST USE
•
Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
•
Place the device on a flat stable surface and ensure a minimum
of 10 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
•
Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the
local voltage before connecting the
device. Voltage 220V-240V 50Hz)
•
Fill the water tank.
Instruction manual
EN
Publicité
