Publicité
Step 33
å
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D22 and D23).
å
Fasten the DRAWER RIGHT (35GC) to the RIGHT DRAWER SIDE (D22) and the DRAWER LEFT (35GD) to the LEFT
DRAWER SIDE (D23). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten one PULL (191K) to the OUTER DRAWER FRONT (K). Use two BLACK 7/8" MACHINE SCREWS (37S).
å
Repeat this step for the remaining outer drawer.
Roller end
1
2
3
191K
37S
BLACK 7/8" MACHINE SCREW
(4 used for the PULLS)
Page 38
10A
D23
K
3S
GOLD 5/16" FLAT HEAD SCREW
(8 used for the SLIDES)
433961
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
Roller end
D22
1
2
3
Drawer Slide
Center the screw in the oval hole.
5
www.sauder.com/service
Publicité
