Publicité
Step 30
å
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D22 and D23).
å
Fasten the DRAWER RIGHT (35GC) to the RIGHT DRAWER SIDE (D22) and the DRAWER
LEFT (35GD) to the LEFT DRAWER SIDE (D23). Use four GOLD 5/16" FLAT HEAD
SCREWS (3S) through holes #1 and #3.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
Roller end
1
2
3
Page 34
10A
D23
3S
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
433961
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
Roller end
D22
1
2
3
Drawer Slide
Center the screw in the oval hole.
www.sauder.com/service
5
Publicité
