Publicité
CHRONOGRAPH STOPWATCH
JS25/VD54 (with date-VD53)
MINUTE
HAND
SECOND HAND
Time and Date Setting
1. Before setting the time, make sure the
chronograph is stopped and set to zero
(12:00) position.
2. Pull crown out to position 2.
3. Turn crown clockwise until the previous day's
date is displayed.
4. Pull crown out to position 3 when the
second hand is at the 12:00 position.
5. Turn crown to set time.
NOTE: 24-hour hand moves correspondingly
with the hour and minute hands. When
setting the time be sure to check that the
24-hour hand is set properly.
6. Return crown to position 1.
NOTE: When the crown is in position 2,
do not press the pushers. Otherwise the
chronograph hands will move.
4
A
24-HOUR
HAND
1 2 3
B
Chronograph Functions
Basic Function
1. Press A to start/stop the chronograph.
2. Press B to reset to zero.
Interval Timing
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset.
Chronograph Zero Reset
1. If either of the chronograph hands is not at
the zero (12:00) position, pull crown out to
position 3.
2. Press A to move hands clockwise; press B to
move hands counter-clockwise.
3. Return crown to position 1.
5
Publicité
