Télécharger Imprimer la page

Haier T 7 Serie Mode D'emploi page 74

Publicité

this way, you can avoid making accidental or
unwanted changes if a button on the
display is pressed accidently during a
cycle.
The key lock can be simply cancelled by
pressing the two buttons simultaneously
again or turning off the appliance.
Digital Display
The display's indicator system allows you to
be constantly informed about the status of
the machine.
*
Only available on certain models
1) DOOR LOCKED INDICATOR LIGHT
The indicator light is illuminated when the
door is fully closed.
Close the door BEFORE selecting the
PLAY/PAUSE button.
When PLAY/PAUSE is pressed on the
machine with the door closed, the
indicator will flash momentarily and then
illuminate.
If the door is not properly closed,
the light will continue to flash for
about 7 seconds, after which the
start command will be automatically
cancelled. In this case, close the
door in the proper way and press
the PLAY/PAUSE button.
Wait until the DOOR LOCKED light has
gone out before opening the door.
2) EASY IRON INDICATOR LIGHT
The indicator light shows the selection of
the relevant option.
3) "Kg
LOAD"
(active only on certain programmes)
During the first minutes of the cycle, the
"Kg LOAD" indicator will remain on while
the intelligent sensor will weigh the
laundry and adjust the cycle time, water
and electricity consumption accordingly.
Through every wash phase "Kg LOAD"
allows to monitor information on the wash
load in the drum and in the first minutes
of the wash it:
- adjusts the amount of water required;
- determines the length of the wash cycle;
- controls rinsing according to the type of
fabric selected to be washed it;
- adjusts the rhythm of drum rotation for
the type of fabric being washed;
- recognises the presence of too much
soap suds, and if necessary, adjust the
amount of rinse water.
- adjusts the spin speed according to the
load, thus avoiding any imbalance.
4) Wi-Fi INDICATOR LIGHT
On models equipped with Wi-Fi, it
indicates the status of the connection. It
could be:
- FIXED ON: remote control enabled.
- SLOW
FLASHING:
disabled.
- QUICK FLASHING FOR 3 SECONDS,
THEN OFF: the machine cannot connect
to the home Wi-Fi network or has not yet
been associated with the App.
74
INDICATOR
LIGHT
remote
control

Publicité

loading

Ce manuel est également adapté pour:

Thasnq286tm5-s