Publicité
WARNING:
don't touch the buttons while inserting
the
plug
because
calibrates the systems during the first
seconds: touching the buttons, the
machine couldn't work property. In
this case, remove the plug and repeat
the operation.
PROGRAMME selector with OFF
position
When the programme selector is turned
the display lights up to show the settings
for the programme selected.
Switch off the washing machine by
turning the selector to OFF.
First starting
- Language setting
After connecting the machine to the
network and turning it on, press the
"TEMPERATURE
"SPIN SPEED" button to display the
available languages.
Select the desired language pressing the
PLAY/PAUSE button.
- Change the language
If you want to change the setting language,
you will have to press simultaneously
"TEMPERATURE
"DELAY START" buttons for about 5
seconds. ENGLISH will appear on the
display, and you will be able to choose a
new
language
"TEMPERATURE SELECTION" or "SPIN
SPEED" button).
Press PLAY/PAUSE button to confirm
your choice.
PLAY/PAUSE button
Close the door BEFORE selecting the
button PLAY/PAUSE.
the
machines
SELECTION"
or
SELECTION"
and
(by
pressing
70
To start the selected cycle with the preset
parameters, press PLAY/PAUSE. When
the programme is running, the display will
show the time to elapse.
Moreover, If you want to modify the
chosen programme, press the desired
options
buttons,
parameters
and
PLAY/PAUSE button to start the cycle.
Only the options compatible with the
set programme can be selected.
After switching on the appliance, wait a
few seconds for the programme to start
running.
PROGRAMME DURATION
When a programme is selected the
display automatically shows the cycle
duration, which can vary, depending on
the options selected.
Once the programme has started you will
be kept informed constantly of the time
remaining to the end of the wash.
The appliance calculates the time to the
end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to that
applicable to the size and composition of
the load.
PROGRAMME END
When
the
display
programme is finished and the DOOR
LOCKED indicator light has gone out, the
door can be opened.
At the end of the cycle, switch off the
appliance by turning the selector to OFF.
The programme selector must be
returned to the OFF position at the end
of each cycle or when starting a
subsequent wash cycle prior to the next
programme being selected and started.
modify
the
default
then
press
shows
that
the
Publicité
