Publicité
4.1 Electrical Connection
WARNING: Do not use extension
cables or multi sockets in power
connection.
WARNING: Damaged power cable
must be replaced by Authorized
Service.
Hot surface warning!
The side walls of your product are
equipped with cooler pipes to en-
hance the cooling system. High
pressure fluid may flow through
these surfaces, and cause hot sur-
faces on the side walls. This is nor-
mal and it does not require servi-
cing. Be careful when you contact
these areas.
5 Preparation
Read the "Safety Instructions" sec-
tion first!
5.1 What To Do For Energy Saving
Connecting the product to elec-
tronic energy-saving systems is
harmful, as it may damage the
product.
• Do not keep the refrigerator doors open
for long periods.
Fixing Bolt
Adjusting Nut
Fixing Bolt
Adjusting Bolt
Before transport or use, never open
the control board cover on the
product. Risk of electric shock and
fire!
Our firm will not assume responsib-
ility for any damages due to usage
without earthing and without power
connection in compliance with na-
tional regulations.
The power cable plug must be eas-
ily accessible after installation.
• Do not place hot food or beverages into
the refrigerator.
• Do not overfill the refrigerator; blocking
the internal air flow will reduce cooling
capacity.
• Since hot and humid air will not directly
penetrate into your product when the
doors are not opened, your product will
optimize itself in conditions sufficient to
protect your food. Under these circum-
stances, functions and components such
as compressor, fan, heater, defrost, light-
EN / 99
FR
AR
EN
Publicité
