Publicité
ELECTRICAL CONNECTION
5. Once all electrical connections are complete, attach the enclosure to the wall using the #8 X 1-1/2" screws [203-1435] provided.
6. Close the Electrical Enclosure using the cover and screws previously removed and set aside.
NOTE: Leaving too much field wire in the electrical enclosure could prevent it from closing properly and may cause damage to the
internal components.
5
6
203-1435
© 2024 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
Part no. 209-1471 09/16/2024
9
800.877.2376
www.robern.com
Instinct Mirror Installation
Publicité
