Publicité
PREPARING THE MIRROR
1. Lay the Instinct Mirror down on a flat, clean surface and insert a Locator Insert [205-4222] into each button receiver.
NOTE: If the wall surface is finished with tile or other similar hard surface materials, the locator insert points can be marked with a paint
pen to transfer the mounting button locations to the wall in the upcoming steps.
1
205-4222
© 2024 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
Part no. 209-1471 09/16/2024
10
800.877.2376
www.robern.com
Instinct Mirror Installation
Publicité
