Publicité
MOUNT THE MIRROR
1. Hang the mirror on the wall, aligning the mirror's brackets onto the mounting bar.
2. Using the marked centerline on the wall, align the mirror's centerline to match. Before proceeding, check the mirror for level.
NOTE: Connect the mirror's DC cable to the electrical enclosure's DC cable and check that the mirror operates as intended.
3. Once the mirror's desired position is determined, press on the areas of the mirror over the locator inserts. The pressure should be
enough to transfer the mounting button locations directly into the wall surface.
NOTE: If the wall surface is finished with tile or other similar hard surface materials, the locator insert points can be marked with a paint
pen to transfer the mounting button locations to the wall.
1
2
3
© 2024 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
Part no. 209-1471 09/16/2024
11
800.877.2376
www.robern.com
Instinct Mirror Installation
Publicité
