Publicité
MOUNT THE MIRROR
4. Remove the mirror from the wall and remove the locator inserts. Following the mounting instructions on page 5, attach the mounting
buttons [211-1570] to the wall at the marked locations using the #8 X 1-1/2" screws [203-1435] and anchors [203-1436] provided.
5. Rehang the mirror on the mounting bar, centered on the mirror's centerline marks, and reconnect the DC Cable connection. Feed
any additional DC Cable length into the wall.
6. Press on the area of the mirror above the mounting buttons until two audible clicks are heard. Pull on each mirror corner slightly to
confirm that both mounting buttons have fully engaged.
4
211-1570
© 2024 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
5
12
6
Part no. 209-1471 09/16/2024
Instinct Mirror Installation
Publicité
