Publicité
ELECTRICAL ENCLOSURE ASSEMBLY
1. Remove the four screws securing the electrical enclosure cover and set aside in a safe place. Use a flat head screwdriver to remove
the 3/4 wire conduit slugs, one on each end for the AC field wire and the DC connection wire.
2. Insert the DC Cable Grommet [203-1707] into the open wire hole location, pushing until seated.
1
3. Flip the Electrical Enclosure over and insert the AC Strain Relief [203-1055] into the available field wire conduit hole.
4. Attach an Enclosure Bracket [220-1282] to each end of the enclosure using the #8 x 3/8" screws [203-1614] provided.
3
© 2024 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
203-1055
2
203-1707
4
6
203-1614
220-1282
Part no. 209-1471 09/16/2024
Instinct Mirror Installation
Publicité
