Publicité
8980765
3.
Do not operate this tool if the power cord is frayed, damaged or poorly
spliced, as an electric shock may occur, resulting in personal injury or
property damage. Have the power cord replace by a qualified service
technician.
4.
Discontinue use if a power cord feels more than comfortably warm while
operating the tool.
5.
Keep all connections dry and off the ground to reduce the risk of electric
shock. Do not touch the plug or wiring with wet hands.
6.
Prevent damage to the power cord by observing the following:
a.
Do not pull on the cord to disconnect the plug from an outlet.
b.
Keep the cord away from heat, oil, sharp edges or moving parts.
7.
Position the cord so it is not stepped on, tripped over or otherwise
subjected to damage or stress.
8.
Do not wrap the cord around the tool, as sharp edges may cut insulation
or cause cracks if wound too tight. Gently coil cord and either hang on a
hook or fasten with a device to keep cord together during storage.
9.
Do not run the cord under carpeting or cover with throw rugs, runners
or similar coverings. Covering that cord may result in the tool overheating
and starting a fire.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in a
malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
CONTENTS
Make sure that all items in the contents are included.
• Rotary tumbler
www.princessauto.com / 1-800-665-8685
3 LB ROTARY TUMBLER
• 0.5 lb of walnut shell media
V1.0
Page 6
Publicité
