V1.0
3.
Clean the rotary tumbler's air vents often. The motor' s fan will draw dust
and other particulates into the tool.
ELECTRICAL SAFETY
WARNING! Do not touch or handle a live tool with any part of your body
that is wet or damp. Wet skin reduces resistance to electrical current,
increasing the danger of a serious or fatal shock.
WARNING! To reduce risk of electric shock, be certain that the plug is
connected to a properly grounded receptacle.
1.
Do not alter any parts of the tool or accessories. All parts and accessories
are designed with built-in safety features that may be compromised if
altered.
2.
Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3.
Do not expose the rotary tumbler to rain, snow, frost or any other damp
or wet conditions. Water entering a tool will increase the risk of electric
shock.
4.
Do not disconnect the power cord in place of using the ON/OFF switch.
This will prevent an accidental start-up when the power cord is plugged
into the power supply.
5.
In the event of a power failure, turn off or unplug the machine as soon as
the power is interrupted. The possibility of accidental injury could occur if
the power returns and the unit is not switched off.
6.
Make certain the power source conforms to requirements of your
equipment (see Specifications).
POWER CORD SAFETY
1.
A polarized plug has two blades of different widths, allowing only one
way to insert the plug into the outlet. If the outlet does not accept a
polarized plug, contact a qualified electrician to install a polarized outlet.
Do not alter the plug, as this may compromise the built-in safety feature.
a.
Do not use any adapter plugs.
2.
Insert the power cord plug directly to the power supply whenever
possible.
Page 5
3 LB ROTARY TUMBLER
www.princessauto.com / 1-800-665-8685
8980765