Publicité
MWO 2024G
• Do not obstruct the ventilation and heat elimination openings or fissures.
• If the power cord of this appliance is damaged, it must be changed
exclusively by a technical assistance centre authorized by the manufacturer,
since special tools are necessary.
The electrical safety of this appliance is guaranteed only when
it is correctly connected to an effective grounding system as
specified by the current norms on electrical safety.
• It's necessary to check this fundamental safety condition and, in case of doubts,
ask for an accurate check of the system by professionally qualified personnel.
The manufacturer cannot be considered liable for possible damages caused
by the lack of grounding of the system
• Before carrying out any operation turn off the appliance and disconnect the
power plug from the outlet and wait for the appliance to be completely cooled.
• Don't connect the appliance to the power supply through external timers or
remote control systems .
• There will be odour emissions at the oven first use, caused by insulting
materials and heating elements.
+
Do not leave the appliance unattended when it is operating.
+
Make sure that the power supply cable does not obstruct
movements around the appliance, so that it cannot be
inadvertently pulled and the oven overturned.
GENERAL WARNINGS
EN
93
Publicité
