Télécharger Imprimer la page

Makita DUC252 Manuel D'instructions page 13

Masquer les pouces Voir aussi pour DUC252:

Publicité

Additional safety warnings:
1.
When using the tool with battery adapter, be
careful not to trip over the cord during operation.
2.
When using the tool with battery adapter, keep
the cord away from obstacles such as a
workpiece and branches during operation. The
cord caught by obstacles may cause serious injury.
3.
Keep bystanders or animals away from the work
area during operation of the chain-saw.
Top handle chainsaw specific safety warnings
1.
This chain saw is designed especially for tree
care and surgery. The chain saw is intended to
be used by properly trained persons only.
Observe
all
instructions,
recommendations from the relevant professional
organization. Otherwise fatal accidents may
occur. It is recommend that always using a rising
platform (cherry picker, lift) for sawing in trees.
Rappelling techniques are extremely dangerous
and require special training. The operators must
be trained to become familiar with safety
equipment usage and climbing techniques.
Always use the appropriate belts, ropes and
carabiners when working in trees. Always use
restraining equipment for both the operator and
the saw.
2.
Perform
cleaning
storage in accordance with the instruction
manual.
3.
Ensure safe positioning of the chain saw during
car transportation to avoid fuel or chain oil
leakage, damage to the tool and personal injury.
4.
Regularly check the functionality of chain brake.
This action reduces a risk of injury when kickback
occurs.
5.
Do not fill the chain oil near fire. Never smoke
when you fill the chain oil.
6.
National regulation may restrict the use of the
chain saw.
7.
If the equipment gets heavy impact or fall, check
the condition before continuing work. Check the
controls and safety devices for malfunction. If
there is any damage or doubt, ask our
authorized service center for the inspection and
repair.
8.
Always activate the chain brake before starting
the chain saw.
9.
Hold the saw firmly in place to avoid skating
(skid movement) or bouncing of the saw when
starting a cut.
10. At the end of the cut, be careful to keep your
balance due to the "drop".
11. Take into account the direction and speed of the
wind. Avoid sawdust and chain oil mist.
Protective equipment
1.
In order to avoid head, eye, hand or foot injuries
as well as to protect your hearing the following
protective equipment must be used during
operation of the chain saw:
The kind of clothing should be appropriate, i. e. it
should be tight-fitting but not be a hindrance. Do
not wear jewelry or clothing which could become
entangled with bushes or shrubs. If you have
long hair, always wear a hairnet!
procedures
and
maintenance
before
It is necessary to wear a protective helmet when-
ever working with the chain saw. The protective
helmet is to be checked in regular intervals for
damage and is to be replaced after 5 years at
the latest. Use only approved protective helmets.
The face shield of the protective helmet (or the
goggles) protects against sawdust and wood
chips. During operation of the chain saw always
wear a goggle or a face shield to prevent eye
injuries.
Wear adequate noise protection equipment
(ear muffs, ear plugs, etc.)
The protective jacket consists of 22 layers of
nylon and protects the operator against cuts. It is
and
always to be worn when working from elevated
platforms (cherry pickers, lifts), from platforms
mounted on ladders or when climbing with
ropes.
The protective brace and bib overall is made
of a nylon fabric with 22 layers and protects
against cuts. We strongly recommend its use.
Protective gloves made of thick leather are part
of the prescribed equipment and must always be
worn during operation of the chain saw.
During operation of the chain saw safety shoes
or safety boots fitted with anti skid sole, steel
toe caps and protection for the leg must always
to be worn. Safety shoes equipped with a protec-
tive layer provide protection against cuts and
ensure a secure footing. For working in trees the
safety boots must be suitable for climbing tech-
niques.
Vibration
1.
Individuals with poor circulation who are exposed to
excessive vibration may experience injury to blood
vessels or the nervous system. Vibration may cause
the following symptoms to occur in the fingers,
hands or wrists: "Falling asleep" (numbness),
tingling, pain, stabbing sensation, alteration of skin
colour or of the skin. If any of these symptoms
occur, see a physician! To reduce the risk of "white
finger disease", keep your hands warm during
operation and well maintain the equipment and
accessories.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
Important safety instructions for battery
cartridge
1.
Before
using
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
2.
Do not disassemble or tamper with the battery
cartridge. It may result in a fire, excessive heat, or
explosion.
battery
cartridge,
read
ENC007-17
all
13

Publicité

loading

Ce manuel est également adapté pour:

Duc302