Publicité
AUX IN CONNECTIONS (JACK3.5mm)
Connect any device with a 3.5 mm plug, such as
a computer, smartphone or tablet, to play your
content on the PORT.
If LINE/AUX is not displayed by default, press the
MODE button (5) until LINE is displayed.
JACK 6.35 : MIC/GUITAR CONNECTION
Connect wired microphones to the 1/4" jack
inputs (17 or 18) for singing or speaking, or a gui-
tar to MIC1 (17) to play your guitar using the PORT
as an amplifier.
The volume of the wired microphones and the
guitar can be adjusted using the dedicated MIC
volume knob (15).
MICROPHONES
A wireless hand microphone (channel A -
863MHz) and a wireless headset microphone
with belt clip transmitter (channel B - 865MHz)
are supplied.
Rotate the UHF ON/OFF/Volume button (22 or 27)
to switch on the wireless handheld or headset
mic. The ON indicator (24 or 28) will light up in
blue.
Switch on the handheld microphone and/or
headset microphone (ON/OFF switch on micro-
phone or belt clip transmitter).
Adjust the volume on the loudspeaker to the de-
sired level using the dedicated volume control.
For the headset microphone, also adjust the vo-
lume on the belt clip transmitter. If either volume
control is set to minimum, no sound will be out-
put .
SINGING ALONG
If you want to sing along with the music, switch
on the wireless microphone function (22 or 27)
and the switch on the wireless microphone or
connect a wired microphone to MIC INPUT (17 or
18). Adjust the volume of the wired microphone
using the MIC VOL control (15). Adjust the volume
of the wireless microphones using the buttons
(22 or 27).
USING THE VOX FUNCTION (SPEECH)
When the VOX function is activated, the music
level decreases when someone speaks into one
of the microphones. The music level returns to
normal when the user stops speaking into the
microphone.
To activate this function, set the VCV switch (16)
to on. To disable this function, set the switch to
off.
RECORD FUNCTION (REC)
Please note that ONLY THE SOUND OF THE
MICROPHONE(s) (wireless mics, connected
wired mic(s) and/or guitar) can be recorded.
You can only record on a USB or SD device.
To start recording, press the RECORD button (9)
on the speaker or the RECORD button on the re-
8
MANUAL - PORT15UHF-BT
©Copyright LOTRONIC 2024
mote control.
A file is created on your USB key or SD card (in a
specific folder at the root of the USB/SD device).
To stop recording, press the RECORD button
again.
To listen to your recording, select the track on the
SD card or USB key.
Note that you can't use the same USB/SD device
to play and record at the same time.
VOLUME CONTROLS
Each input section (multimedia player, wired mi-
crophones, wireless microphones) has its own
volume controls, which must be adjusted on the
back of the speakers, except for the multimedia
player, which can be adjusted with the remote
control.
If these controls are set to minimum, there will
be no sound even if the master volume is set to
maximum.
Set the Master volume to an appropriate level
and adjust the volume of the individual inputs
using their respective volume controls.
REPLACEMENT MICROPHONES
Both wireless UHF microphones are available in
both frequencies.
So, if you prefer to use 2 handheld mics or 2
headset mics, you can do so.
Please find below the order codes
• For handheld mic in 865MHz frequency , order:
PORTUHF-HAND2 (code: 16-6091
• For headset mic in 863MHz frequency , order:
PORTUHF-HEAD (code: 15-6092)
CARE
Unplug the machine before cleaning. Do not use
aggressive detergents. Use a clean cloth to wipe
off any dust or dirt from the product. We are not
liable for damage caused by incorrect handling,
improper use or wear and tear. We reserve the
right to make technical changes without notice.
Publicité
