Publicité
REMOTE CONTROL
INSTALLING THE BATTERIES IN THE REMOTE
CONTROL
The battery of the remote (CR2025) is included
and in place, simply pull the plastic strip out for
the remote to work.
REMOTE CONTROL FOR USB/SD PLAYER
Please note that the remote control controls
only the Multimedia player, not the other
input sources of the unit. If the volume is set to
minimum on the multimedia player, there will
be no sound output, even if the Master volume
control of the speaker box is set to maximum.
ON/OFF: Turns the player on and off.
MODE : Press until the desired operating mode is
displayed
MUTE : Mutes or resumes the volume
▶‖ Play/Pause: Press to play/pause/resume a
track on the USB/SD player.
REC : Press to start/stop recording when a USB/SD
device is connected
/CH- : Return to the previous track.
/CH+ : Skip to the next track
RPT : Press to change repeat mode: one, all tracks,
no repeat.
TWS : Press to switch the unit into TWS pairing
mode to connect to a 2. PORT-UHF-BT box
VOL -: Decreases the volume of the multimedia
player.
VOL+ : Increases the volume of the USB/SD player
EQ : Select among several sound modes (Rock,
Pop, Jazz, Classic, Flat)
TRK : Track selection. Press the TRK button, select
a track via the number keys (0-9) and press EN-
TER to confirm
Number buttons : Press the number of the de-
sired track
ENTER : Once you have made your selection,
press ENTER to confirm.
Code: 15-6083
USING YOUR PORT
HOW TO PAIR BLUETOOTH WITH DEVICES
Activate the Bluetooth function on your BT device,
search for "IBIZA-PORT" in the list of found devices
and connect to the speaker.
Once connected to a device in BT, you can use the
MODE button to switch from Line to BT. The MODE
button only works between active and connected
sources.
Play/pause the music on your connected BT device.
We recommend that you set the volume of the
paired device to maximum and adjust it on the
speaker itself.
TWS CONNECTION
This function allows to pair 2 units of the PORT-
UHF-BT range with 1 single Bluetooth source to
enjoy wireless stereo sound.
Turn off the Bluetooth feature on your smart-
phone. Switch on both speakers and keep the
"TWS" button (8) on one of the speakers (mas-
ter speaker) pressed for a few seconds. If the
connection was successful, you will hear the
message "left channel" from the master speaker,
and "right channel" from the slave speaker.
Activate the Bluetooth function of your smart-
phone and select IBIZA-PORT in the list of found
devices. Now the master speaker is connected
to your Bluetooth source. After that, you can use
any mode to play music in TWS mode.
USB/SD PLAYER
Insert a USB memory stick (1) or SD card (2) into
the appropriate socket.
The USB key must be formatted in exFat or FAT32
to be recognised. If the high-capacity storage
device does not work on the speaker, use a low-
er-capacity storage device.
The unit will automatically switch to USB/SD play-
er when a device is detected and start reading.
You can switch between connected devices and
inputs using the MODE button (5).
Select a track using the or buttons on the
speaker or remote control, and press ▶‖ (4) to
pause or resume playback.
To adjust the volume of the USB/SD Speaker,
there are 2 separate volumes:
- Master volume of the speaker.
- USB/SD volume of the player (can be in-
creased or decreased on the speaker using the
Previous/Next buttons or the remote control).
LINE IN/OUT CONNECTION (RCA)
Connect an RCA plug to the LINE IN sockets (20).
If LINE is not displayed by default, press the MODE
button (5) until LINE is displayed.
Adjust the line source volume control (13).
You can connect any line device (mixer, ampli-
fier, another active speaker, TV, etc.) to this RCA
input.
www.ibizashop.eu
EN
7
Publicité
