Publicité
Inserting, changing and removing the water filter
■ Connect the tube to the drip tray and to
the outlet (Image D).
■ Press the rotary switch 10 to confirm.
The descaling programme will continue
(approx. 20 minutes), water flows out of
the outlet and in the drip tray inside the
appliance.
■ When the message "Empty tray and
vessel" appears on the text display 4,
empty the vessel under the outlet and
the drip tray. Then reinsert them both.
■ When the message "Refill water tank"
appears on the text display 4, flip up the
lid of the water tank 6 and pull the water
tank 6 up and out of the appliance.
■ Rinse the water tank 6 thoroughly.
■ Fill the water tank 6 with tap water up to
the max. mark.
■ Reinsert the water tank 6.
■ The descaling programme will continue
(approx. 5 minutes), water flows out of
the outlet and in the drip tray inside the
appliance.
■ When the message "Empty tray and
vessel" appears on the text display 4,
empty the vessel under the outlet and
the drip tray. Then reinsert them both.
■ After the descaling programme is
finished, the appliance is ready for
operation.
38
Inserting, changing and
removing the water filter
The Melitta
filters lime scale and other contaminants
from the water. The water filter should be
changed regularly, at the latest when the
appliance prompts to do so. The water
filter is available in specialised shops.
When the water filter is inserted, changed
or removed, this must be confirmed in the
Filter sub-menu. Once the water filter is
inserted or changed, the appliance resets
the water filter cycle to zero and is able to
prompt for changing the water filter again
at the right time.
Inserting the water filter
■ Put the water filter in a glass with
tap water for several minutes before
inserting it in the appliance.
■ Call up the Care sub-menu.
■ Select Filter in the menu.
■ Select Insert filter in the menu.
■ Select Start in the menu.
■ Flip up the lid of the water tank 6.
■ Pull the water tank 6 up and out of the
appliance.
■ Carefully screw the Melitta
filter cartridge into the thread on the
base of the water tank using the
screw-in aid at the bottom end of the
coffee scoop provided.
■ Fill the water tank 6 with tap water up to
the max. mark.
■ Reinsert the water tank 6.
■ Press the rotary switch 10 to confirm.
Operating Instructions: Melitta
PRO AQUA filter cartridge
®
PRO AQUA
®
CI
| 2316-0520 | 2020-05
®
®
Publicité
