Télécharger Imprimer la page

Suncast BMDB1120 Serie Instructions D'assemblage page 3

Publicité

A
Before You Begin...
• Read instructions thoroughly prior to assembly.
This kit contains parts that can be damaged if assembled incorrectly or in the wrong sequence.
• Please follow instructions.
Suncast is not responsible for replacing parts lost or damaged due to incorrect assembly.
• Check for all parts before you begin assembly.
Use the provided parts list in this manual to verify that you have all the parts required to assemble
your deck box.
• Deck box should be placed on a solid, level, flat surface
• Assistance may be needed for portions of this assembly.
• •
ik
lEX
Indicates at least 1 additional adult is needed to complete this step.
Indicates a power drill may be used. Refer to Caution statements for guidelines. A Phillips #2 Screwdriver may
also be used in place of a power drill.
A
Caution
• Power tools can apply excessive torque resulting in damage to the product. Suncast recommends using a variable speed,
cordless drill with a variable clutch set at the lowers setting. A #2 Phillips driver bit is compatible with the hardware provided.
Suncast makes no guarantee that following this recommendation will prevent damage ot the product. Damage to parts due to
overtorque are not covered under Suncast's limited warranty.
• Not for storage or use with flammables, explosives, caustics or other chemicals.
• Product is water resistant and not waterproof. Locate unit away from gutter and downspouts for optimal performance.
• Not intended for use by children. This is not a toy box.
• To avoid risk of suffocation, do not allow children to play inside container.
• DO NOT place in areas near highly reflective surfaces. (Note: Low- E windows are more reflective than standard windows and
may affect the longevity of the product).
• DO NOT place near objects that are hot or can become hot.
• Exercise caution when moving fully loaded product. This product is not intended for transporting heavy objects. Use as a
stationary storage device only.
• DO NOT stand on lid.
A
Care and Maintenance
To maintain the look of your product, we recommend cleaning it at regular intervals with mild soap and water. DO NOT use bleach,
ammonia or other caustic cleaners, and DO NOT use stiff bristle brushes. Failure to perform cleaning at regular intervals could result
in permanent staining of the plastic. This type of damage is not covered under warranty.
At regular intervals, inspect the product to make sure that assembly integrity has been maintained. Repair or replace broken
parts immediately.
3

Publicité

loading