CARE PRO MAX II Manuel D'utilisation page 3

GB
- This bench must be assembled and used by an adult.
- For using this bench, you need a minimum space of approximately 250 centimetres length x 200
centimetres width.
- For a secure use a flat and stable surface is necessary.
- Don't let children play with the machine. CARE declines any responsibility for damages they could
suffer.
- Don't leave children near the machine during your training.
- To keep its security level, the bench must be checked regularly. It is necessary to replace any
damaged part and not to use the bench until it is repaired.
- CARE declines any responsibility in case of technical changes made by the user on any of its
products.
- Before starting your training it is important to consult your doctor to determine the intensity level of
your program.
- Read carefully the recommendations before starting. An excessive or bad programmed training can
damage your health.
- It is recommended to wear appropriate clothes and shoes.
- Check that the setting device is correctly placed and tightened.
- Charge and discharge the bar simultaneously on both sides of the bar to avoid any falling.
- Maximum user weight: 140 kg
- Maximum weight bar holder: 136 kg
- Maximum leg weight: 60 kg
Maintenance
- Regularly check that elements fastened with nuts and bolts are correctly tightened.
- To maintain the level of safety, the equipment must be regularly checked. It is vital that any faulty
parts are replaced and that it is not used until completely repaired. Remember regularly to grease
moving parts.
As sweat is very corrosive, do not allow it to come into contact with the enameled or chromed parts of
the equipment, particularly the computer. Immediately wipe the equipment after training. The enameled
parts
can be cleaned using a damp sponge. All aggressive or corrosive products should be avoided.
-2-