Publicité
5. Press the bottom handle to adjust the height.
6. Loosen the right silver screw to adjust the rotator angle, then re-tighten after positioning.
7. Turn off the heater and power, then unplug the device.
NOTE
•
Handle glassware with care; ensure it is thoroughly cleaned and dried after use.
•
Always fill the water bath with water before heating. The apparatus uses electrical
heating; operating without water is strictly prohibited.
•
Apply vacuum grease to all ground glass joints before connecting them.
•
For costly solutions, a simulated test is recommended to confirm the unit's suitability.
•
Use a thermometer to achieve precise temperature measurements.
•
After use, turn off the power and unplug the device from the socket.
Disposing of Used Devices
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device recycling
and collection point. Check the symbol on the product, instruction manual and packaging. The plastics used to
construct the device can be recycled in accordance with their markings. By choosing to recycle you are making a
significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
EN
Publicité
