Publicité
This User Manual has been translated using machine translation. We have made every effort to
ensure the translation is accurate, but please note that automated translations are not perfect
and are not meant to replace human translators. The official version of the User Manual is in
English. Any differences between the translated version and the original English are not legally
binding. If you have any questions about the accuracy of the translation, please refer to the English
version, which is the official reference. More language versions are available upon request via
info@expondo.com.
Technical data
Parameter description
Product name
Model
Voltage [V] / Frequency [Hz]
Power [W]
Speed range [/min]
Bath volume [L]
Dimensions (Width x Length x Height) (mm)
Weight [kg]
Protection class
Purpose
The product is used to efficiently and gently remove solvents from samples through evaporation. It is widely used
in chemical, biochemical, and pharmaceutical labs.
Assembly
1. Down-seal on Pipeline tube.
2. Apply vacuum grease on Pipeline tube and up-seal.
3. Join up-seal and lock ring, then place them onto Rotator. Insert lock pole φ3+ into lock hole φ3-.
4. Place flat seal onto lock ring.
5. Carefully tighten one flange screwed connection to join the condenser and rotator.
6. Tighten the other flange screwed connection to adapt the 29# joint with spiral onto Down-seal.
7. Turn the square nut onto spiral to release the evaporator bottle when the nut is turned back.
8. Apply vacuum grease at both joints of the feeding cock and condenser.
9. Attach PTFE tube to the feeding cock (sometimes pre-installed).
10. Place the drain dish onto PTFE tube, adjust for optimal positioning of PTFE tube, aligning feeding cock with
condenser.
Operation
1. Plug into a 220V/50Hz power source.
2. Fill the bath with water, set the temperature (RT to 90°C), and turn on the heater.
3. Switch on the power; the green indicator light will illuminate.
4. Turn the rotary dial to set the speed (20 to 198 RPM).
EN
Parameter value
Rotary evaporator
SBS-RV-1000
230~ / 50
1500
0-200
640x450x700
19.05
1
Publicité
