Siemens SIMATIC ET 200SP Manuel page 107

Homologation cULus HAZ. LOC.
Underwriters Laboratories Inc. selon
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
● ANSI/ISA 12.12.01
● CSA C22.2 No. 213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
Installation Instructions for cULus haz.loc.
● WARNING - Explosion Hazard - Do not disconnect while circuit is live unless area is
known to be non-hazardous.
● WARNING - Explosion Hazard - Substitution of components may impair suitability for
Class I, Division 2 or Zone 2.
● This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D; Class I,
Zone 2, Group IIC; or non-hazardous locations.
WARNING: EXPOSURE TO SOME CHEMICALS MAY DEGRADE THE SEALING
PROPERTIES OF MATERIALS USED IN THE RELAYS.
Homologation FM
Factory Mutual Research (FM) selon
Approval Standard Class Number 3611, 3600, 3810 (ANSI/ISA 82.02.01)
CSA C22.2 No. 213
CSA C22.2 No. 61010-1
APPROVED for use in Class I, Division 2, Group A, B, C, D Tx ;
Class I, Zone 2, Group IIC Tx
Homologation ATEX
Selon EN 60079-15 (Electrical apparatus for potentially explosive atmospheres; Type of
protection "n") et EN 60079-0 (Electrical apparatus for potentially explosive gas atmospheres
- Part 0: General Requirements)
CPU 1515SP PC (F)
Manuel, 05/2017, A5E32701807-AC
Caractéristiques techniques
10.1 Normes et homologations
107