DISPLAY FUNCTIONS
•
Pressing the Cooling mode button
while the cooler is in Standby
mode will transition the cooler into
Pre-Soak mode.
•
There are three cooling modes:
◦ Max cooling (recommended) −
The cooler automatically optimizes
the water flow rate to deliver
maximum cooling and temperature
drop based on surrounding air
conditions.
◦ Eco − Use this mode if you are
in a very hot/dry climate and are
willing to sacrifice a little cooling
to consume less water. Water
flow rate and consumption will be
reduced.
◦ Manual − Only available on the
Apex 1200, Apex 2000, Apex
4000 and Apex 6500. This mode
allows for precise water flow rate
control to dial in your preferred
cooling experience. Settings 1-5
correspond to water flow rate from
low to high. It is recommended for
experienced users only.
4. Water Level Indicator
These LED indicators display the
reservoir's water level and give
warnings when the level is low.
All five indicator bars will be blue
when the reservoir is full. As the
water level drops and it's time to
refill, the bottom bar will illuminate
yellow. However, the system will
continue to cool. When the water level
goes below the minimum operating
level for the pump, the water empty
indicator light will illuminate red, and
the power supply to the pump will be
shut off. Refilling the reservoir will
allow the cooler to continue normal
operation.
5. Airflow Direction
This feature allows for automatic air
direction control to customize your
cooling experience. Note: Apex 500
and Apex 700 models only.
•
Navigate to 'Airflow' on the LCD
screen menu and use the < >
buttons to choose from one of 3
Airflow direction modes:
◦Sweep – The vertical louvers will
oscillate left to right to provide
a sweeping range of airflow. The
blue Airflow direction light will
remain illuminated in sweep mode.
◦Narrow – The airflow is channeled
towards the center for maximum
velocity and reach.
◦Wide – The louvers move
outwards to diffuse the air,
providing a wider coverage area of
steady flow.
Note: You can customize your
cooling experience with precise
louver control by using the
Portacool App!