Publicité
Important: Connect your cooler to the Portacool
features!
1. Power/Mode Button
Press this button to start up and shut
down your evaporative cooler.
•
After the cooler is plugged in, the
control will automatically go into
Standby mode.
•
To turn on the evaporative cooler,
press the power/mode button.
The cooler will start circulating
water to pre-soak the media for
optimal cooling. The fan will run
at low speed during the pre-
soak process until the cycle is
complete. Once the pre-soak
cycle is done, the fan and cooling
modes will automatically return to
their previous settings.
Note: Pressing the fan speed
buttons will exit the evaporative
cooler from Pre-Soak mode.
•
Press the power/mode button
once to shut down your
App and install the latest updates to unlock and enjoy all
®
evaporative cooler. If the media is
wet, the cooler will automatically
dry it, and the shutdown timer will
begin. Once the timer is complete,
the cooler will return to Standby
mode. If the water system is
not running, the cooler will go
directly to Standby mode without
following the drying process.
Note: To bypass the automatic
media drying, press the power/
mode button again to go directly
to standby mode.
•
Press and hold the power/mode
button for 3 seconds to turn off
the evaporative cooler and control
panel. Once turned off, the LED
will also turn off.
Note: When in Off mode, the cooler
cannot be directly controlled from
the app and will not run previously
configured schedules until it is
returned to standby.
DISPLAY FUNCTIONS
2. Fan Speed Buttons
Press the +/- buttons to increase or
decrease the fan's speed.
•
There are five fan speeds, and the
blue light bars indicate the current
speed setting. Note: Pressing the
fan speeds while the cooler is in
Standby will put the cooler into
Fan Only mode.
3. Cooling Mode Button
Press to manually turn the water
system on and off or to change the
Cooling mode.
•
Pressing the cooling button once
will turn on cooling to the previous
mode. Use the < > arrows in the
menu to change the mode on the
LCD screen if desired. Note: it is
unnecessary to toggle the Cooling
mode button once it's set to your
preference.
13
Publicité
