Publicité
▪
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
▪
If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust related
hazards.
5.4
Power tool use and care
▪
Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
▪
Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
▪
Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
▪
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
▪
Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
parts and any other condition that may affect the power tool's operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
▪
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
▪
Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.
5.5
Service
▪
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6 SPECIFIC SAFETY WARNINGS FOR CIRCULAR SAWS
▪
Make sure that all devices screening the saw blade are in perfect working order.
▪
Make sure that the saw blade is screened correctly. Especially observe the following
instructions:
− Never block the saw blade guard. Repair a jammed saw blade guard before using the
machine again.
− Replace a broken tension spring before using the machine again.
− Never remove the riving knife. The distance between the toothed rim and the riving knife
should be 5 mm maximum. The height difference between the riving knife and the
toothed rim should be 5 mm maximum.
▪
Do not use saw blades made of HSS steel.
▪
Do not use bent, deformed or otherwise damaged saw blades.
▪
Do not use saw blades which do not meet the specifications stated in this manual.
▪
Before sawing, remove all nails and other metal objects from the workpiece.
▪
Never start sawing before the saw reaches its full speed.
▪
Securely clamp the workpiece. Never attempt to saw extremely small workpieces.
▪
Only put the machine aside after switching off and when the saw blade has come to a
complete standstill.
▪
Never try to slow the saw blade down by exerting pressure on the side.
▪
Before performing maintenance to the machine, always unplug the machine.
Copyright © 2022 VARO
POWX0520
P a g e
| 5
EN
www.varo.com
Publicité
