Publicité
Dear customer
Please familiarize yourself with the proper
usage of the device by reading and follow-
ing each chapter of this manual, in the order
presented. Keep these operating instruc-
tions for further reference.
Please read the enclosed "General safety
instructions for power tools" and all
additional safety instructions in this
operating instructions!
This manual contains important informa-
tion on operating and handling the device.
Keep these operating instructions for fur-
ther reference. Please pass it on along with
the unit if it is handed over to a third party.
Battery and charger not included!
The battery is available separately under
art. No: 7062517 (2 Ah), 7062518 (4 Ah) or
7063735 (5 Ah). The charger is available
separately under art. No: 7063688 (2.4 A) or
7063554 (4 A).
These items are available online and in
participating stores.
1. Explanation of the symbols
The following symbols are used in the user
manual or on the product:
Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Denotes risk of personal injury,
loss of life or damage to the tool in
case of non-observance of the
instructions in this manual.
CE stands for "Conformité
Européenne", which means "In
accordance with EU Regulations".
With the CE marking, the
manufacturer confirms that this
Electric tool complies with the
applicable European directives.
UKCA stands for: "UK Conformity
Assessment". This means
"Compliant with UK regulations".
With the UKCA mark manufacturer
confirms that this unit complies
with the applicable UK regulations.
Do not dispose of electric power
tools with domestic refuse.
2. Additional safety instructions
for cordless heat guns
Dispose of used packaging material
2.1
carefully or store it out of the reach of
children. There is a danger of
suffocation!
Persons with limited physical, sensorial
2.2
or mental abilities are not allowed to
use the device, unless they are super-
vised and briefed for their safety by a
qualified person.
Do not leave the switched on device
2.3
unattended and keep the device out of
reach of children and persons in need
of supervision.
Only operate the device as intended and
2.4
not e.g. for igniting fire, drying clothes
or other materials.
Ensure that the lighting is adequate in
2.5
the work area.
Tools get hot during operation; allow
2.6
cooling prior to handling them.
Periodically check all nuts, bolts and
2.7
other fixings and tighten where
necessary.
Always switch off the heat gun after
2.8
work. Please note that the device is still
very hot. There is risk of injuries and
fire!
Be careful when using the unit near
2.9
flammable or easy fusible materials
such as plastics or glass. Do not direct
the unit for long time at the same place.
Never point the running unit to people,
animals, plants, flammable objects or
liquids.
Do not use the unit in explosive
2.10
atmosphere.
Be aware that heat may be conducted
2.11
to combustible materials that are out of
sight.
Please note that poisonous gases may
2.12
be emitted while removing paint. Use
suitable inhalation protection and
ensure adequate ventilation.
English
7
Publicité
