Publicité
16
TROUBLE SHOOTING
BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, DISCONNECT THE
MACHINE FROM THE POWER SUPPLY.
Trouble
The magnetic support has
no magnetic force
The machine stops during
the work
MANY
POTENTIAL
CONNECTION TO THE ELECTRICITY GRID.
Should you in necessary repairs not able to properly to perform or you have
not the prescribed training for it always attract a workshop to fix the
problem.
HOLZMANN MASCHINEN GmbH
LANGLOCHBOHRMASCHINE–MORTISING MACHINE-TALADRO HORIZONTAL-PERCEUSE HORIZONTALE- WIERTARKO - FREZARKA LBM 250C
Possible cause
Switch defective
Power supply is off
Fuse is defectivet
Electric contactor is defective
One or more phases of the current
missing.
Machine overloading
Thermal contact of the machine is
switched off
SOURCES
OF
ERROR
www.holzmann-maschinen.at
Repair switch
Repair power supply
Change fuse
Repair or change electric
contactor
Check if all 3 phases are live
Do not overload the machine
Wait for the motor to cool down
CAN
BE
CLEARED
N O T I C E
TROUBLE SHOOTING
Solution
BY
THE
EXPERTLY
Seite 40
Publicité
