Télécharger Imprimer la page

Sony VPH-722Q1 Mode D'emploi page 9

Publicité

SYSTEM CONNECTIONS
>ONNECTING NOTES
> First make sure that the power to each piece of equipment is
' @ The cable may be extended to max. 50m. If the connecting cable
urned off.
Is too long (longer than 50 m), picture quality may be degraded
Turn clockwise.
Note the position.
To remove, press
both catches and
Align and insert.
CCQ cable
Ising the VPH-722Q1/102001 projector with a Sony microcomputer
To avold interference with radio or TV reception, always use the supplied AC power cord
and the optional connecting cable as described In the connection configuration below.
This is indispensable to comply with FCC Rule Part 15 Subpart J, regulating |
interference to radio or TV reception caused by computing device.
to AC IN
AC power
cord
sam}> to a wall outlet
connect the output to the VIDEO
LINE IN connector on the projector.

Publicité

loading

Ce manuel est également adapté pour:

Vph-722qmVph-1020q1Vph-1020qm