Publicité
Connector
panel
@® RGB IN connectors (BNC)
Allow a character generator, microcomputer, video camera or a
special adaptor for future videotext/teletext having analog RGB
outputs to be connected.
R, G, B: to RGB outputs
SYNC/HD: to a composite sync or horizontal sync output
VD: to a vertical syne output
@ TO VPR-722 connector (14-pin plug)
To remotely control the projector, for instance, when It Is installed
on the ceiling, connect the optional VPR-722 remote controller here
using the optional CCQ connecting cable.
@ LINE IN connectors
Allow a video tape recorder, video camera, color receiver/monitor,
etc. having video/audio line outputs to be connected.
VTR (8-pin): to an 8&pin TV connector on a VTR
VIDEO (BNC): to a video line output
AUDIO (mini): to an audio line output
Caution: Use either the VTR or VIDEO/AUDIO connectors, but not
both simultaneously.
Do not connect a TV tuner or a color receiver/monitor equipped with
an-8-pin connector to the VTR connector, because signal assign-
~ ment is different.
@ POWER switch
. Depress to turn the power on. When the VPR-722 remote controller
is used, power wil! be supplied to the controller.
@ AC IN socket
Connect
the supplied ac power (mains) cord here and to an ac
(mains) outlet.
Speakers
@ RGB IN connectors (BNC)
R, G, B, SYNC/HD, VD
® TO VPR-722 connector (14-pin plug)
@ LINE IN connectors
VTR (8-pin), VIDEO (BNC), AUDIO (mini)
@ POWER switch
@® Ac IN socket
WARNING for the customers In the United Kingdom
THIS APPARATUS MUST BE EARTHED
IMPORTANT
The wires in this mains lead are coloured in accordance with the
following code:
Green-and-yellow............. Earth
Blue
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings
identifying the ter-__
minals in your plug proceed as follows:
The wire which is coloured green-and-yeliow must be connected to
the terminal in the plug which Is marked by the letter E or by the
safety earth symbo! = or coloured green or green-and-yellow.
The wire which is coloured blue must be connected te the terminal
which is marked with the letter N or coloured black.
:
The wire which is coloured brown must be connected to the ter-_
minal which is marked with the letter L or coloured red.
Publicité
