Publicité
EnGLIsh
RATCHET
DCF500
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
No load speed
Length
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑2:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a
=
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
22
EC‑Declaration of Conformity
o
Machinery Directive
WALT one of the
e
Ratchet
DCF500
DCF500
V
12
D
WALT declares that these products described under
DC
e
1
Technical Data are in compliance with:
2006/42/EC, EN 62841-1:2015 + A11:2022, EN 62841-2-2:2014
0–450
+ AC:2015.
mm
330
These products also comply with Directive 2014/30/EU and
kg
0.88
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
dB(A)
81
dB(A)
89
dB(A)
3
m/s
2
3.4
Markus Rompel
m/s
2
1.5
Vice-President Engineering, PTE-Europe
D
WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
30.09.2024
a
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WALT at
e
WALT.
e
Publicité
