Publicité
3.2 Fixing the rail on the ambulance
The SILVER+ rail must be attached to
the ambulance by means of the lower
aluminium profile 03-1145 and 22 DIN
7991 M8x20 10.9 screws.
The installation information is indicated
on label 14-0311.
Once the plate is fixed, the rail must be installed following these points:
1
Place the "T" fasteners (12-0749) in the
corresponding grooves of the aluminium
profile until they are inserted into their
positions:
2
Push the rail until the mechanism stops.
Once this position is reached, tighten the
4 hexagonal screws DIN 933 M10x20,
previously removed, to 60Nm.
3
Lastly, fix the rail with 4 screws to the
aluminium profile:
2 pcs. DIN 933 M10x16 on the front.
2 pcs. DIN 93 M10x16 on the back.
REV 1
05-24
Instruction manual
SILVER+ R-1200
31
Publicité
