Publicité
Note:
Clean the mop cloth after 60 minutes of mopping
to maintain water flow and cleaning quality.
B3-6—Remove the mop cloth mount
When the robot returns to the dock after
cleaning, press the latches on both sides,
and slide the mop cloth mount backwards
to remove it.
Notes:
• Wash the mop cloth after each use, and regularly
empty the water tank of unused water.
• Remove the mop cloth mount when not mopping.
Connect to the App
This robot supports both Roborock and
Xiaomi Home apps. Choose the one that
best meets your needs.
❶ Download App
Option 1: Search for "Roborock" in the App
Store or Google Play or scan the QR code to
download and install the app.
Option 2: Search for "Xiaomi Home" in the
App Store or Google Play or scan the QR
code to download and install the app.
❷ Reset WiFi
1. Open the upper cover and find the WiFi
indicator.
2. Press and hold the
and
you hear the "Resetting WiFi" voice alert. The
reset is complete when the WiFi indicator
flashes slowly. The robot will then wait for a
connection.
Note:
If you cannot connect to the robot due to your
router configuration, a forgotten password, or any other
reason, reset the WiFi and add your robot as a new device.
❸ Add device
Open the Roborock App, tap the "Search for
device" button, or open Xiaomi Home app,
tap "+" in the top right corner and add the
device as instructed in the app.
Notes:
• The actual process may vary due to ongoing app
updates. Follow the instructions provided in the app.
• Only 2.4 GHz WiFi is supported.
06
• If the robot waits more than 1 hour for a connection,
WiFi will be automatically disabled. If you want to
reconnect, reset the WiFi before proceeding.
Instructions
On/Off
Press and hold the
robot. The power indicator will turn on and
the robot will enter standby mode. Press
and hold the
and complete the cleaning cycle.
The robot cannot be turned off when it is being
Note:
charged.
Starting Cleaning
buttons until
Press the
robot will plan its cleaning route according
to its scan of the room. It splits a room into
zones, first draws out zone edges, and then
fills the zone in a zigzag pattern. In doing
so, the robot cleans all zones one by one,
efÏciently cleaning the house.
Zone 1 –
Cleaned
Zone 4 –
Next Zone
button to turn on the
button to turn off the robot
button to start cleaning. The
Zone 2 –
Cleaned
Zone 3 –
In Progress
Publicité
