Valor Charlton & Jenrick PE2 Serie Instructions D'installation

INSTALLATION INSTRUCTIONS
PE2CFV—PE2 Clearview Front
For PE2 Electric Fireplace Insert
NOT FOR USE WITH GAS MODEL FIREPLACES
23
[602 mm]
7
26 8 "
[683 mm]
Installation
The PE2CFV is held in place by hooks and magnets.
Hooks are already installed on the back of the front.
Hanging bracket and bottom magnet brackets, supplied
loose, must be installed to the fireplace.
1. Secure the hanging bracket to fireplace with 3
screws supplied.
2. Install bottom side brackets. Release 2 screws
on each side of the fireplace, at the bottom.
4009631-01
© Copyright Miles Industries Ltd., 2024.
5
8 "
11
16 "
[16 mm]
3
10 16 "
[259 mm]
25
[642 mm]
Slide the brackets under the screw heads in the
orientation shown; tighten the screws.
3. Hook front to top bracket & stick bottom magnets to
side brackets.
PE2CFV Clearview Front:
2 hooks at top, 2 magnets
at bottom
PE2
Hanging
bracket
4011891
Bottom
brackets (2)
4011892
1
4 "
Clearview
Front Assy
Overview
PE2 right
side view