Publicité
CLEANING & REPLACING EXHAUST
1
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
(Fig. 2).
CHANGING THE BATTERY
1
NOTE: Only replace the battery with a 27A 12V Alkaline battery.
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Pry off the battery cover and remove it from the battery compartment (Fig. 2).
3. Remove the battery from the battery compartment. Insert the new battery with the terminals in
the direction as shown (Fig. 3).
4. Position the battery cover at the angle of inclination as shown. Then insert it into the slot on the
battery compartment and press down the battery cover to click into place (Fig. 4 & 5).
FILTER
2
3
2
3
4
4
21
5
Publicité
